# ClickUp Dashboards vs Google Sheets: Which Report Goes Where

A Dashboard can only reason about data ClickUp holds. Which reports belong in ClickUp, which belong in Google Sheets, and what the card export actually costs.

## Key takeaways

- Build a report in a ClickUp Dashboard when it needs only data ClickUp holds, and in Google Sheets when it joins a rate card, a budget or contracted hours.
- Free Forever gets 60 Dashboard uses in total, counting opens and card edits, and the counter never resets.
- Unlimited lifts the Dashboard cap at $7 per user per month billed annually, and Advanced cards start at Business, at $12.
- Exporting a card's data as CSV, PDF or an image needs Business or above.
- A synced report holds up as 3 tabs: synced ClickUp rows, lookups you keep by hand, and formulas that read both.

ClickUp Dashboards are good. The cards are quick to assemble, they are live by construction, and for the questions ClickUp anticipated they beat a spreadsheet.

The reason teams keep ending up in Sheets anyway is narrow and consistent: a Dashboard can only reason about things ClickUp knows. The moment your report joins task data to something outside ClickUp, the Dashboard runs out of vocabulary.

## Dashboard strengths

Live by default. Nothing to sync or schedule, and nothing goes stale. A card is a query against the workspace.

Drill-through. Click a number and you land on the tasks behind it. A spreadsheet number is a dead end unless you built a link column.

No field mapping. Add a custom field in ClickUp and the card can use it immediately. A synced sheet needs the column added.

Time in Status, Sprint velocity and workload. ClickUp computes these from data it holds and you would have to reconstruct. Time in Status in particular comes from a status history a sync does not carry.

Permissions follow the workspace. A person who cannot see a Space cannot see it on the Dashboard either. In a spreadsheet, sharing is a separate decision you have to get right by hand.

## Dashboard costs

Free Forever gets trial access: 60 Dashboard uses in total, counting both opening one and editing a card, on a counter that never resets. The Unlimited plan lifts that cap, at $7 per user per month billed annually.

ClickUp tiers cards again on top of the plan. Free cards are on every plan, Standard cards start at Unlimited, and Advanced cards start at Business, at $12 per user per month billed annually. Exporting a card's data as CSV, PDF, PNG, JPEG, or SVG is Business as well.

The reporting a spreadsheet replaces is therefore the paid part of ClickUp. [The Free plan limits](/blog/clickup-free-plan-limits) put those numbers next to the 5-export cap, which is the other reason Free and Unlimited workspaces end up reporting out of Sheets.

## Spreadsheet strengths

Joins to things ClickUp does not know. Rate cards. Contracted hours. Budget by client. Revenue targets. Headcount plans. Invoice dates. None of these are ClickUp concepts, and every one of them is one tab away in a spreadsheet.

Arbitrary maths. Utilization against contracted hours, margin per project, a weighted forecast, a burn rate against a budget that lives in finance's model. `SUMPRODUCT` and `QUERY` will do things no card offers.

History that ClickUp overwrites. A ClickUp field keeps only its current value. If you want to know what the pipeline looked like on the first of every month, you need snapshots, and a sheet that appends a dated copy each month is the simplest snapshot store there is.

Sharing outside the workspace. A client can open a Google Sheet. Giving them a ClickUp Dashboard means a guest seat and exposure to a hierarchy you probably do not want them in. [Sharing ClickUp data with clients](/blog/share-clickup-data-with-clients) covers that trade in full.

Charts people can actually edit. A stakeholder who wants the bars grouped differently can do it themselves in Sheets.

Cost. The Google Workspace plan you already have includes spreadsheets at every tier, with no per-card gate.

<figure>
<img src="/images/blog/clickup-dashboards-vs-google-sheets-reporting-sheets-report.avif" alt="A reporting tab in Google Sheets built on synced ClickUp data, with scorecards for total time spent, billable time and average session duration above bar charts of weekly hours, hours per Space and hours per List" width="1400" height="795" loading="lazy" decoding="async" />
<figcaption>The raw ClickUp rows land on one tab. The charts and the joins live on another, and refreshes leave them alone.</figcaption>
</figure>

## Drawing the line

A rule that holds up in practice: **if the answer only needs data ClickUp holds, build it in ClickUp.**

| Question                                            | Belongs in                    |
| --------------------------------------------------- | ----------------------------- |
| How many tasks are open per assignee?               | Dashboard                     |
| What is our sprint velocity?                        | Dashboard                     |
| How long is a task in Review?                       | Dashboard, Time in Status     |
| What is our workload next week?                     | Dashboard                     |
| What did we bill each client this month?            | Sheets, joined to a rate card |
| Are we above or below budget on this project?       | Sheets, joined to a budget    |
| What is our utilization against contracted hours?   | Sheets                        |
| How did the pipeline change month over month?       | Sheets, with snapshots        |
| What goes on the client's monthly report?           | Sheets                        |
| What is the revenue forecast from this stage field? | Sheets                        |

The rows in the bottom half all need a number ClickUp has never heard of.

## The exporting trap in between

There is a middle path that looks efficient and is not: build the card in ClickUp, export it as CSV, paste it into the spreadsheet, build the join there.

On Business and above, most Dashboard cards export as CSV, PDF, PNG, JPEG, or SVG. It works, once. Then it becomes a monthly chore, the paste lands one column off in month four, and the finance model that references the range silently reads the wrong column.

Anything that ends with a person pasting a file into a report every month has the same failure mode, and nobody notices it on the month it happens.

The alternative is a synced tab: the raw ClickUp rows land on one tab automatically, and the report on the next tab references them with formulas that never need re-pointing. That is the whole design. The joins, the rate card, and the chart stay where you built them, and the data underneath refreshes without anybody touching it.

## Building it that way

3 tabs, and the discipline is in keeping them separate.

**Tab 1, `Tasks`.** Nothing but synced ClickUp rows. Don't edit it by hand, add a column or sort it. Whatever refreshes it will overwrite whatever you do.

**Tab 2, `Lookups`.** Rate cards, client names, budgets, targets, contracted hours. Maintain it by hand, deliberately.

**Tab 3, `Report`.** Formulas only, reading from the first two. This is the tab anyone else opens.

```
=QUERY(Tasks!A:H,
  "select D, sum(G) where F = 'complete' group by D
   order by sum(G) desc label sum(G) 'Hours'", 1)
```

The reason for the split is what happens on refresh. A sync rewrites `Tasks` in full, because a full replace is what removes rows for deleted tasks, and some deletions arrive no other way: [ClickUp deletes a parent's subtasks without emitting an event for the children](/blog/clickup-subtasks-in-google-sheets). Anything you added to that tab is gone on the next run. Keep your work on tabs the sync never touches and refreshes become invisible.

<img src="/images/blog/clickup-dashboards-vs-google-sheets-reporting-3-tabs.avif" alt="3 spreadsheet tabs with different jobs. The Tasks tab has synced ClickUp rows, and every refresh overwrites it. The Lookups tab has rate cards and budgets maintained by hand. The Report tab has the formulas reading from the first two, including the QUERY that groups hours by client" width="1400" height="653" loading="lazy" decoding="async" />

[Building a ClickUp time tracking report in Google Sheets](/blog/clickup-time-tracking-report-google-sheets) has the 3 queries most teams end up wanting, and they return the effort fastest.
